How Can One Welder Handle GMAW, GTAW, and Plasma Cutting

The Dawn of Versatile Fabrication

The Multi-Process Imperative

Walk into any small shop ten years ago and you’d see three big machines taking up half the floor: a MIG box, a TIG box, and a plasma cutter. Each one needed its own outlet, its own cart, and its own corner nobody could walk through. Change jobs? Unplug one, roll another over, find the right torch, swap the gas bottle—ten minutes gone. Multiply that by twenty times a day, and you’re burning hours just moving stuff around. Today, nobody has room for that nonsense. One decent inverter box can now do clean MIG beads, pretty TIG welds, and slice 10 mm plate like butter. That’s not a luxury anymore; it’s how you stay in business.

Introducing Decapower: Expertise and Innovation

Decapower started building welders in 2011 because we got tired of hearing customers say, “I love your MIG, but do you make a TIG too?” We said sure, and then we went further and started stuffing everything into the same case. Our shop runs on a simple rule we call “INSIDE-THINKING”—figure out what the guy on the bench actually needs before he knows he needs it. That’s why our multi-process machines exist: real welders, real cutters, beginner-friendly controls, pro-level results.

Decapower’s Fusion Multi-Process Technology

Core Technologies Enabling All-in-One Capability

• Inverter and Digital Control Systems

Everything starts with IGBT inverters and a little brain (we call it the MCU). The inverter turns wall power into whatever the torch needs at that second—high amps for spraying MIG wire, rock-steady low amps for TIG on thin aluminum, or the screaming-hot open-circuit voltage a plasma torch wants. The digital board watches every millisecond and keeps the arc exactly where it belongs. No drifting, no surging, just clean power.

• Simplified Synergic OperationMost guys don’t want to memorize twenty settings. Our XTRAMIG machines have a synergic mode that’s honestly stupid-simple: turn the knob to the thickness you’re welding, pick steel or stainless or aluminum, and the machine does the rest. Using the Synergic mode on the XTRAMIG-215, you can teach a sixteen-year-old to weld neat, clean beads in just ten minutes.

Seamless Transition Between Processes

Switching jobs used to mean swapping leads, changing polarity, and digging out a different torch. On our Fusion machines, you just grab the torch you want, flip the switch on the front panel, and go. MIG seam on a trailer frame? Done. Lift TIG root pass on stainless pipe? Two seconds later, you’re scratching the arc. Need to trim a bracket? Snap the plasma torch on and slice. You can even repair a cracked bulldozer bucket out in the field with this welder—weld the crack using MIG, tack the patch with TIG, and cut the excess with plasma, all powered through the same 15-meter extension lead.

Flagship Products Demonstrating Triple Threat Capabilities

The Ultimate All-in-One Solution: PMCT-205

The PMCT-205 is the Swiss-army-knife welder. Six processes in a box that weigh less than your toolbox.

• Feature Breakdown: Welding and Cutting Integration

You get real MIG, Lift TIG (DC), stick, and a 50-amp plasma cutter that slices 12 mm clean, 16 mm severance. Same power source, same ground cable, just pick the torch you feel like using.

• Advantages for Diverse ApplicationsMobile mechanics love it—one box in the back of the ute does everything. You can recover the cost in just three months, as you no longer have to lug around three separate machines.

Synergic Performance Master: XTRAMIG-215 (or XTRAMIG 200 SYN)

• Precision Multi-Process Control (GMAW, GTAW, SMAW)

This is the everyday workhorse. MIG, flux-core, stick, and Lift TIG, all with a big, clear LCD that actually makes sense. Turn it on, and the screen tells you exactly what to set. Guys who learned on old transformer machines say the arc is quieter—like a soft hiss instead of a crackle.

• Enhanced Material Flexibility (Steel, SS, Aluminum)It eats 0.8 mm or 1.0 mm wire all day and still runs solid on 6 mm aluminum with regular 100 % argon. Traditional welding guns often clogged, but our welder produces perfect stacked-dime welds even on 5 mm thick steel plates.

Advanced Performance for Professionals: ULTRAMIG-230 (Double Pulse)

• Pulse and Double Pulse for Aluminum Excellence

The ULTRAMIG-230 EXPERT has a single pulse and a double pulse. Double pulse is like fish-scale heaven on aluminum—clean, shiny, almost no soot, barely any heat warp. A trailer shop switched to it and cut its grinding time in half.

img.ULTRAMIG-230 EXPERTDouble Pulse MIG Aluminum Welding Machine.jpg

• Achieving High-Quality, Low-Spatter Welds

Even on stainless, it looks like TIG but runs three times faster. Customers keep sending us pictures of welds they’re proud to show the inspector.

Beyond the Standard: Customized Welding Solutions

The Value of Customized Engineering

Off-the-shelf is great until the job is weird. Need 400 amps of MIG and a built-in water cooler in a 40 kg box? We’ve done it. Want your logo on the front panel and a special start-up screen? Done. We’ve built machines that run on 50 Hz African power, machines that live on fishing boats in salt spray, even a bright-pink TIG for a lady fabricator who was tired of boring gray boxes.

We do full OEM—your brand, your colors, your manual. Or ODM if you just want a few tweaks to one of our proven platforms. One European dealer sells our machines under his name in ten countries; you’d never know they came out of our factory in Dongguan unless you opened the panel and saw the Decapower sticker we hide inside as a joke.

Partnering with Decapower for Optimal Value

We’re welders who build welders. When you call, you talk to someone who’s burned a rod before breakfast. That’s why our multi-process boxes actually work in the real world, not just on a spec sheet.

FAQ

Q: What welding processes are included in Decapower’s Fusion Multi Process range?

A: You get stick (SMAW), MIG/MAG (GMAW), flux-cored, Lift TIG (GTAW), and a proper plasma cutter—sometimes six functions in one box.

Q: How is Decapower able to tailor welding solutions for specific customers?

A: Our engineers love a challenge. Send us the problem; we’ll redesign the board, the case, or the software until it does exactly what you need. OEM or ODM, no drama.

Q: What is the primary advantage of using Pulse MIG welding?

A: You get way less spatter, prettier beads, and almost no distortion—perfect for aluminum or thin stainless that warps if you look at it wrong.

Q: What is the purpose of the Hot Start feature on Decapower welders?

A: Hot Start gives the rod a quick kick of extra juice the second you strike, so even damp 7018s light first time instead of sticking and making you swear.